VTT
VTT headquarters in Espoo, Finland. Photo: vttfinland
A section of plastic waste collected does not qualify for mechanical recycling and is incinerated instead. VTT has developed and introduced a form of chemical recycling based on pyrolysis, a process which turns almost all plastics and their mixtures into oil - the raw material from which fuel, plastic and other chemicals is made.
The most common forms of plastic bottles, bags and wraps are well served by mechanical recycling. They are sorted, washed, melted and remoulded into new products. In its native Finland, VTT has estimated that somewhere 40% and 60% of separately collected plastic waste ends up being incinerated.
There are several technical reasons for the failure of mechanical recycling in this context. It can be very difficult to separate various types of plastics, especially in, for example, multi-layer plastic films. The physical quality of plastic will deteriorate after much use and several recycling loops and will prove unfit for use.
“By chemical recycling, however, plastics and their mixtures can be broken down into separate raw materials, whose quality is equal to that of respective virgin materials,” explains Anja Oasmaa, Senior Principal Scientist at VTT.
VTT's two-year Business Finland Wastebusters' project has provided the groundwork has shown that chemical recycling offers an ecologically stable alternative to incineration and potentially to mechanical recycling.
Advanced pre-treatment as a basis for cost-effective recycling
In the WasteBusters project, long polymer chains of plastics and their mixtures were pyrolysed, i.e., heated in the absence of oxygen, and thus chopped into shorter chains and in part even to monomers. The resulting pyrolysis wax or oil can probably be processed with traditional methods at oil refineries.
“Pyrolysis oil can be distilled into separate monomers, diesel and other fractions, some of which can be used directly as fuels and some as raw material for plastics and other chemicals,” Oasmaa shares.
The project focused on pre-treatment and pyrolysis of plastic waste, and also somewhat on post-treatment of the product. According to Oasmaa, improvements of pre-treatment in particular are decisive for a cost-effective concept.
“There are all kinds of films as well as both dense and porous pieces together in plastic waste, which makes it difficult to handle. We managed, however, to make it homogenous with the Modix-extruder developed by VTT.”
Sustainable raw materials to replace virgin fossil ones
The supply of plastic waste in Finland has been considered too small for pyrolysis. Scientists, however, calculated in the project that a network of approximately ten pyrolysis plants could prove profitable, if pyrolysis of plastic waste and wood waste were combined. They suggested that pyrolysis plants be attached to waste recycling plants.
The topic actually stirred up interest in the market during the project
“For example, the recycling of polystyrene has aroused a lot of business interest, as not all polystyrene waste can be mechanically recycled. Also, chemical recycling provides raw material for the production of other materials besides polystyrene, such as latex,” Oasmaa explains.
VTT is already preparing further studies on related topics, such as recycling of polystyrene; removal of hazardous compounds from plastic waste; and production of diesel fuels from plastic waste to be used in flexible power generation and marine transport.
”Companies are interested in the fact that plastic waste can be turned into other chemicals besides plastics, which will then replace virgin fossil raw materials in a sustainable manner. We want to develop this line of business with sustainable solutions in close cooperation with companies”, says Oasmaa.
Back to Homepage
Back to Chemicals & Biochemicals