Reasons To Go For Asphalt Reshaping

Asphalt resurfacing basically is a method of removing the asphalt’s top layer and then replacing it with a fresh new layer. Carrying out maintenance for asphalt has become a necessity, especially when your parking lot is in regular use. Small pores may start appearing on the top layer, which will result in a serrated surface.

In case your asphalt’s condition turns bad, it gets holes and cracks, you should consider resurfacing it. Any wear and tear of asphalt is a sign that it’s time to resurface it. Investing money in asphalt reshaping is going to extend the life expectancy of your driveway. Moreover, it will increase its curb appeal.

The following are some things to consider about asphalt reshaping.

Repairing the cracks should be a priority

Repairing the cracks should be the first thing for anyone because if the cracks are left unsealed, water will enter them, and this will lead to further deterioration. Water basically seeps into the asphalt and disturbs the sub-base, which leads to wide structural damage. Sealing of cracks is crucial to maintain a good pavement life. In case the water enters, asphalt’s surface layer can be removed and replaced with a new layer.

Enhances the look of your driveway/parking lot

Many people go for asphalt reshaping basically to enhance the curb appeal of their driveway or parking lot. A fresh asphalt layer is just going to add a fresh look to your place. It’s especially good in business to give even a more professional touch to your commercial pavement. Customers are more attracted to places that have neat and clean pavement. Serrated surface, cracks, and pores don’t look good at all and look very unattractive.

Drainage issues have to be fixed

The issue of drainage has to be fixed; otherwise, the standing water is going to cause a huge problem for you. Many people face the problem of freezing water in cold climates. The water gets into the cracks in asphalt and then freezes there. This is going to cause huge destruction to your foundation if not fixed timely. Through asphalt resurfacing, you get a chance to fix all such issues. You need to fix the drainage first and then go for asphalt reshaping to make sure that it doesn’t get attacked by water again.

Correcting the grade

The more your asphalt ages, the more your pavement gets out of shape because of the heavy vehicles. The sub-base material erodes, and as a result, the asphalt gets cracks, becomes less attractive and more out of shape. This poses a threat to bikers because riding a bike on a serrated surface could lead to accidents. Through asphalt reshaping, you have a chance to correct the overall grade of your parking lot and driveway. In this way, the curb appeal is restored, too, and your pavement becomes safe to walk and drive on.

Process of asphalt resurfacing

First, the nearby drainage system is adjusted to maintain the proper drainage system. Next comes the cleaning of the current asphalt. A new asphalt layer is bonded to the existing pavement by using a tack coat. After this, a fresh asphalt course is paved that will eventually level out the parking lot or the driveway. The process is given a finishing touch by paving another layer of asphalt over the area you were treating. This gives a smooth touch to your pavement, and it’s all ready. As the businesses are growing, asphalt resurfacing is becoming more popular to give a professional look to the pavement.

Back to Homepage

Back to Construction & Engineering